Vulcan VCRG48M Restaurant Series Gas Griddle – Manual, 48″W

Description

This low profile Vulcan VCRG48M Restaurant Series Gas Griddle has a frame that features the front, sides and front top ledge made from corrosion-resistant stainless steel. To add maximum durability to the entire structure, the frame has been welded with precision. This 1″ thick polished steel griddle plate is welded to a 3-1/4″ H stainless steel backsplash. It has (4) U-shaped aluminized steel burners that run on natural gas and offer infinite heat control for each 12″ of griddle width. The griddle is fitted with a 4-1/2 qt. capacity grease can and also has a 3/4″ rear gas connection point. It has a convertible gas pressure regulator for easy conversion to LP gas.
For user convenience; the griddle is given a working height of 12-1/2″. The 4″ sturdy stainless steel legs can be easily adjusted. It has tapered side splashes and a stainless steel trough that eliminate any potential of corrosion. The highly efficient standing pilot ignition system is designed to save energy. Each burner has a heat valve control knob that gives infinite control. It is constructed standard for natural gas service and can be easily converted using the LP conversion kit that is supplied with the unit.
The Vulcan VCRG48M offers 25,000 BTU per 12″ of width and has overall dimensions of 48″ W x 27″ D x 16″ H. It weighs 408 lb.

Restaurant Series Gas Griddle with stainless steel front, sides and front top ledge

Corrosion-resistant design

Fully welded frame to add more durability

1″ thick polished steel griddle plate welded to a 3-1/4″ H stainless steel backsplash

4 U-shaped aluminized steel burners

Burners run on natural gas and offer infinite heat control for each 12″ of griddle width

Griddle fitted with a 4-1/2 qt. capacity grease can

Also has a 3/4″ rear gas connection point and a convertible gas pressure regulator in case a user uses LP gas

Griddle with working height of 12-1/2″ to make it easier for users to use the unit in a comfortable position

Has 4″ stainless steel corrosion-resistant legs

Tapered side splashes and a stainless steel trough to eliminate any potential of corrosion

Each burner has a heat valve control knob that gives infinite control

Highly efficient standing pilot ignition system helps save energy

Constructed standard for natural gas service and can be easily converted using the LP conversion kit that is supplied with the unit

Offers 25,000 BTU per 12″ of width

Has Overall dimensions of 48″ W x 27″ D x 16″ H

Weighs: 408 lb.